Our service spectrum
Equipment technology
Boring and injection equipment
In addition to two injection containers featuring six and eight pumps, DMI also boasts a large, state-of-the-art equipment pool. The equipment is regularly maintained and repaired and continuously developed further. Special equipment is developed for special measures in order to guarantee cost-effective execution.
Furthermore, a large number of diaphragm pumps for resin and gel injection and various screw pumps for mortar and cement grouting are also available.
Verpresspumpen für alle Arten von Kunstharzen, Gelen und Feststoffen
![LP20/20-3 two-component synthetic resin pump: 4.5 l/min / 200 bar](/wp-content/uploads/2023/06/bohr_bild_content.jpg)
LP20/20-3 two-component synthetic resin pump: 4.5 l/min / 200 bar
![Two-component gel pump with an output of: 14 l/min / 200 bar](/wp-content/uploads/2023/06/bohr_bild_content_1.jpg)
Two-component gel pump with an output of: 14 l/min / 200 bar
![I 500 single-component resin pump Output: 4 l/min / 200 bar](/wp-content/uploads/2023/06/bohr_bild_content_2.jpg)
I 500 single-component resin pump Output: 4 l/min / 200 bar
Mixing pump stations and mixing units with various performance capacities
![Pump station with mixer and agitator VS 63 / VS 50 Q max. 36 l/min](/wp-content/uploads/2023/06/bohr_bild_content_3.jpg)
Pump station with mixer and agitator VS 63 / VS 50 Q max. 36 l/min
![MPS 110 Q max. 270 l/min](/wp-content/uploads/2023/06/bohr_bild_content_4.jpg)
MPS 110 Q max. 270 l/min
![MPS 80 fully automatic unit Q max. 106 l/min](/wp-content/uploads/2023/06/bohr_bild_content_5.jpg)
MPS 80 fully automatic unit Q max. 106 l/min
![MRS 200 mixing and agitating station, 4.5 m3/h](/wp-content/uploads/2023/06/bohr_bild_content_6.jpg)
MRS 200 mixing and agitating station, 4.5 m3/h
![OM 200 mixing unit Q max.: 4.5 m3/h](/wp-content/uploads/2023/06/bohr_bild_content_7.jpg)
OM 200 mixing unit Q max.: 4.5 m3/h